RSP-3000-48 3000W 48VDC 62.5A PFC Power Supply Industrial SMPS

• Output Type: Single
• Warranty: >2 Years
• Output Power: 3000W
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: RSP-3000-48
• Input Voltage: Full Range
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Voltage Regulating Mode: Width Modulation Type
• Energy Transmission: One-way Transmission
• Modulation System: PWM
• Certification: CE, RoHS, CCC, FCC
• Output Frequency: 47-63Hz
• Rated Power: 3000W
• Size: 294*185*45mm
• Weight: 3.3Kg
• IP Level: IP20
• Efficiency: 90%
• PFC: >0.95
• Protections: short circuit/overload/over voltage/over temp
• Output Voltage: 48VDC
• Output Current: 62.5A
• Transport Package: Carton Packing
• Trademark: SMUN
• Origin: Wenzhou, Zhejiang, China
• HS Code: 8504401400
• Production Capacity: 1000PCS/Week
• Package Size: 35.00cm * 25.00cm * 20.00cm
• Package Gross Weight: 3.300kg

Product Description

MODEL		RSP-3000-12	RSP-3000-24	RSP-3000-48
OUTPUT	DC VOLTAGE	12V	24V	48V
OUTPUT	RATED CURRENT	200A	125A	62.5A
OUTPUT	CURRENT RANGE	0 ~ 200A	0 ~ 125A	0 ~ 62.5A
OUTPUT	RATED POWER	2400W	3000W	3000W
OUTPUT	RIPPLE & NOISE (max.) Note.2	150mVp-p	150mVp-p	200mVp-p
OUTPUT	VOLTAGE ADJ. RANGE	10.8 ~ 13.2V	22 ~ 28V	43 ~ 56V
OUTPUT	VOLTAGE TOLERANCE Note.3	±1.0%	±1.0%	±1.0%
OUTPUT	LINE REGULATION	±0.5%	±0.5%	±0.5%
OUTPUT	LOAD REGULATION	±0.5%	±0.5%	±0.5%
OUTPUT	SETUP, RISE TIME	1000ms, 80ms at full load
OUTPUT	HOLD UP TIME (Typ.)	10ms at full load
INPUT	VOLTAGE RANGE	110~ 264VAC    254 ~ 370VDC
INPUT	FREQUENCY RANGE	47 ~ 63Hz
INPUT	POWER FACTOR (Typ.)	0.95/230VAC at full load
INPUT	EFFICIENCY (Typ.)	87.5%	90%	91.5%
INPUT	AC CURRENT (Typ.)	20A/180VAC    16A/230VAC
INPUT	INRUSH CURRENT (Typ.)	60A/230VAC
INPUT	LEAKAGE CURRENT	<2.0mA / 240VAC
PROTECTION	OVERLOAD	100 ~ 112% rated output power
PROTECTION	OVERLOAD	User adjustable continuous constant current limiting or constant current limiting with delay shutdown after 5 seconds, re-power on to recover
PROTECTION	OVER VOLTAGE	13.8 ~ 16.8V	28.8 ~ 33.6V	57.6 ~ 67.2V
PROTECTION	OVER VOLTAGE	Protection type : Shut down o/p voltage, re-power on to recover
PROTECTION	OVER TEMPERATURE	Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION	AUXILIARY POWER(AUX)	12V 0.1A(Only for Remote ON/OFF control)
FUNCTION	REMOTE ON/OFF CONTROL	Please see the Function Manual
FUNCTION	ALARM SIGNAL OUTPUT	Please see the Function Manual
FUNCTION	OUTPUT VOLTAGE TRIM Note.5	2.4 ~ 13.2V	4.8 ~ 28V	9.6 ~ 56V
FUNCTION	CURRENT SHARING	Please see the Function Manual
ENVIRONMENT	WORKING TEMP.	-20 ~ +70ºC (Refer to "Derating Curve")
ENVIRONMENT	WORKING HUMIDITY	20 ~ 90% RH non-condensing
ENVIRONMENT	STORAGE TEMP., HUMIDITY	-40 ~ +85ºC, 10 ~ 95% RH
ENVIRONMENT	TEMP. COEFFICIENT	±0.05%/ºC (0 ~ 50ºC)
ENVIRONMENT	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note 4)	SAFETY STANDARDS	UL60950-1, TUV EN60950-1 approved
SAFETY & EMC (Note 4)	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
SAFETY & EMC (Note 4)	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC/ 70% RH
SAFETY & EMC (Note 4)	EMC EMISSION	Compliance to EN55022 (CISPR22) Conduction Class B, Radiation Class A ; EN61000-3-2,-3
SAFETY & EMC (Note 4)	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
OTHERS	MTBF	104.5K hrs min.  MIL-HDBK-217F (25ºC)
OTHERS	DIMENSION	278*177.8*63.5mm (L*W*H)
OTHERS	PACKING	4Kg; 4pcs/16Kg/1.89CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies." 5. Can't use the PWM signal to control the output voltage. 6. PV(PIN3) and PS(PIN4) of CN1 or CN2 must be shorted if "Output Voltage TRIM" function is not used. Otherwise, the power supply unit will have no output. PV(PIN3) and PS(PIN4) of CN1 or CN2 must be disconnected if "Output Voltage TRIM" function is used. Otherwise, the internal electrical components may be damaged, and the power supply unit may thus be out of order.