| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | 2 Years |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | SD-25A-5 | SD-25B-5 | SD-25C-5 | SD-25A-12 | SD-25B-12 | S-25C-12 | SD-25A-24 | SD-25B-24 | SD-25C-24 | |
| Output | DC voltage | 5V | 12V | 24V | ||||||
| Rated current | 5A | 2.1A | 1.1A | |||||||
| Current range | 0-5A | 0-2.1A | 0-1.1A | |||||||
| Rated power | 25W | 25.2W | 26.4W | |||||||
| Ripple&noise | 100mVp-p | 120mVp-p | 150mVp-p | |||||||
| Voltage tolerance | ±2.0% | ±1.0% | ±1.0% | |||||||
| Line regulation | ±0.5% | ±0.3% | ±0.2% | |||||||
| Load regulation | ±0.5% | ±0.3% | ±0.2% | |||||||
| Set up,rise time | 2000ms,50ms,full load | |||||||||
| Input | Voltage range | A:9.2-18VDC B:19-36VDC C:36-72VDC | ||||||||
| Efficiency | 69% | 73% | 78% | 71% | 75% | 80% | 73% | 75% | 80% | |
| DC current | 3.2A/12V | 1.6A/24V | 0.8A/48V | 3.2A/12V | 1.6A/24V | 0.8A/48V | 3.2A/12V | 1.6A/24V | 0.8A/48V | |
| Protection | Overload | Rated output power 115%~150% | ||||||||
| Protection type:hiccup mode,auto-recovery after fault condition is removed | ||||||||||
| Over voltage | 5.75-6.75V/10%load | 16.8-20V/10%load | 31.5-37.5V/10%load | |||||||
| Protection type:hiccup mode,auto-recovery after fault condition is removed | ||||||||||
| Environment | Working temperature | -10ºC~+60ºC | ||||||||
| Working humidity | 20-90%RH | |||||||||
| Storage temp,humidity | -20~+85ºC,20%-90%RH | |||||||||
| Temp.coefficient | ±0.03%ºC(0-50ºC) | |||||||||
| Vibration | 10 ~ 500Hz, 2G 12min./1cycle, period for 60min. each along X, Y, Z axes | |||||||||
| Safety & EMC |
Safety standards | Compliance to:CE and GB4943.1 EN 60950.1 safety standards | ||||||||
| Withstand voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-PG:0.5KVAC | |||||||||
| Isolation resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC/ 70% RH | |||||||||
| EMC emission | EN61000-3-2:2014/EN61000-3-3:2013 | |||||||||
| EMC immunity | EN 55032:2015/EN55035:2017/60950-1 | |||||||||
| Others | MTBF | ≥3682.6K hrs MIL-HDBK-217F(25ºC) | ||||||||
| Size | L99*W97*H36mm | |||||||||
| Packing | 0.38KG | |||||||||
| Note | 1. All parameters NOT specially mentioned are measured at 12V/24V/48V input,rated load and 25ºC of ambient temperature. 2. Ripple&noise are measured at 20MHz of bandwidth by using a 12 "twisted pair -wire terminated with a 0.1uf and 47uf parallel capacitors. 3. Tolerance:includes set up tolerance,line regulation and load regulation. 4. Derating output is required under low input voltage. Please refer to the derating curve for details. 5. The power supply should be considered as a part of the components in the system. All EMC tests will test the test samples on a metal iron plate with a thickness of 1mm, a length of 360mm * width of 360mm. |
|||||||||
){kind=link}