RSP-500-24 500W 24VDC 20A PFC Power Supply For Industry
|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Output Type: | Single |
| Warranty: | >2 Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Model | RSP-500-12 | RSP-500-15 | RSP-500-24 | RSP-500-27 | RSP-500-48 | |
| Output | DC voltage | 12V | 15V | 24V | 27V | 48V |
| Rated current | 41.7A | 33.4A | 21A | 18.6A | 10.5A | |
| Current range | 0-41.7A | 0-33.4A | 0-21A | 0-18.6A | 0-10.5A | |
| Rated power | 500.4W | 501W | 504W | 502.2W | 504W | |
| Ripple&noise | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | 150mVp-p | |
| Voltage adj.range | 10-13.2V | 13.5-18V | 20-26.4V | 26-30V | 41-56V | |
| Voltage tolerance | ±1.0% | ±1.0% | ±1.0% | ±1.0% | ±1.0% | |
| Line regulation | ±0.3% | ±0.3% | ±0.2% | ±0.2% | ±0.2% | |
| Load regulation | ±0.5% | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| Set up,rise time | 1500ms,80ms/230VAC 3000ms,80ms/115VAC(at full load) | |||||
| Hold up time(Typ.) | 18ms/230VAC 14ms/115VAC(at full load) | |||||
| Input | Voltage range | 88-264VAC 124~370VDC | ||||
| Frequency | 47 ~ 63Hz | |||||
| Power factor | PF>0.95/230VAC PF>0.98/115VAC(at full load) | |||||
| Efficiency | 88% | 88% | 89% | 90% | 91% | |
| AC current | 6A/115V 3A/230V | |||||
| Inrush current | 20A/115V 40A/230V | |||||
| Leakage current | <2.5mA/240VAC | |||||
| Protection | Overload | 105-130% rated output power | ||||
| Protection type:hiccup mode,auto-recovery after fault condition is removed | ||||||
| Over voltage | 13.8-16.2V | 18.8-21.8V | 27.6-32.4V | 32.9-38.3V | 58.4-68V | |
| Protection type:Shut down o/p voltage,re-power on to recover | ||||||
| Over temperature | Shut down o/p voltage,receovers automatically after temperature goes down | |||||
| Function | Remote control | Power ON:open or 0-0.8VDC between RC+(pin 4)&RC-(pin 3) on CN100 | ||||
| Power OFF:4-10VDC between RC+(pin 4)&RC-(pin 3) on CN100 | ||||||
| Remote sense | Compensate voltage drop on the load wiring up to 0.3V | |||||
| Fan Control | RTH2≥50ºC±10ºC Fan on;RTH≤40ºC±10ºC Fan off | |||||
| Environment | Working temperature | -30ºC~+70ºC(Refer to "Derating Curve") | ||||
| Working humidity | 20-90%RH non-condensing | |||||
| Storage temp,humidity | -20~+85ºC,10%-95%RH | |||||
| Temp.coefficient | ±0.03%ºC(0-50ºC) | |||||
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, 60 min. each along X, Y, Z axes | |||||
| Safety & EMC |
Safety standards | Compliance to:CE and GB4943.1 EN 60950.1 safety standards | ||||
| Withstand voltage | I/P-O/P:2KVAC I/P-FG:2KVAC O/P-PG:0.5KVAC | |||||
| Isolation resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC/ 70% RH | |||||
| EMC emission | EN61000-3-2:2014/EN61000-3-3:2013 | |||||
| EMC immunity | EN 55032:2015/EN55035:2017/60950-1 | |||||
| Others | MTBF | ≥187.7K hrs MIL-HDBK-217F(25ºC) | ||||
| Size | L230*W127*H40.5mm | |||||
| Packing | 1.3KG,9pcs/12.7kg/0.7CUFT | |||||
| Note | 1. All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25ºC of ambient temperature. 2. Ripple&noise are measured at 20MHz of bandwidth by using a 12 "twisted pair -wire terminated with a 0.1uf and 47uf parallel capacitors. 3. Tolerance:includes set up tolerance,line regulation and load regulation. 4. Derating output is required under low input voltage. Please refer to the derating curve for details. 5. The power supply should be considered as a part of the components in the system. All EMC tests will test the test samples on a metal iron plate with a thickness of 1mm, a length of 360mm * width of 360mm. |
|||||
){kind=link}