RSP-3000-12 3000W 100-264VAC Input 24V/36V/48V/60V/72V/110VDC Switching Power Supply With PFC Function

• Customization: Available
• Output Type: Single
• Warranty: >2 Years
• Model NO.: RSP-3000-24/36/48/60/72/110
• Output Power: 3000W
• Input Voltage: Full Range
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Voltage Regulating Mode: Width Modulation Type
• Energy Transmission: One-way Transmission
• Modulation System: PWM
• Certification: CE, RoHS, CCC, FCC
• Output Frequency: 47-63Hz
• Rated Power: 3000W
• Size: 294*185*45mm
• Weight: 3.3Kg
• IP Level: IP20
• Efficiency: 90%
• PFC: >0.95
• Protections: short circuit/overload/over voltage/over temp
• Transport Package: Carton Packing
• Trademark: SMUN
• Origin: Wenzhou, Zhejiang, China
• HS Code: 8504401400
• Production Capacity: 1000PCS/Week
• Package Size: 35.00cm * 25.00cm * 10.00cm
• Package Gross Weight: 3.300kg
• Lead Time: 5 days (1 - 10 Pieces) ; 10 days (11 - 100 Pieces) ; To be negotiated ( > 100 Pieces)

Product Description

Model		RSP-3000-24	RSP-3000-36	RSP-3000-48	RSP-3000-60	RSP-3000-72	RSP-3000-110
Output	DC voltage	24V	36V	48V	60V	72V	110V
	AC220V In Rated current	125A	83.3A	62.5A	50A	41.6A	27.2A
	AC220V In Rated power	3000W	3000W	3000W	3000W	3000W	3000W
	AC220V In Efficiency	89%	91.20%	91.60%	92%	92.30%	93.40%
	AC110V In Rated current	91.7A	61.1A	45.8A	36.7A	30.6A	22.7A
	AC110V In Rated power	2200W	2200W	2200W	2200W	2200W	2200W
	AC110V In Efficiency	87%	88.50%	89.50%	90%	90.60%	91.30%
	Ripple&noise	160mVp-p	180mVp-p	200mVp-p	200mVp-p	230mVp-p	300mVp-p
	Voltage adj.range	17-25V	25-36.5V	33-48.5V	41-61V	50-73V	74-110V
	Voltage tolerance	±3.0%	±3.0%	±3.0%	±3.0%	±3.0%	±3.0%
	Line regulation	±0.3%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	Load regulation	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	Set up,rise time	3s,60ms/220VAC      8s,60ms/110VAC(at full load)
	Hold up time(Typ.)	10ms(at full load)
Topology	PFC	Interlaced boost
	PWM	Interlaced parallel double tube forward excitation
Input	Voltage range	100-264VAC  124~370VDC
	Frequency	47 ~ 63Hz
	Power factor	PF>0.97/220VAC  PF>0.98/110VAC(at full load)
	Standby Consumption	10W
	Inrush current	33A/115V    60A/230V
	Input connection	3Pin KF78 type,pin=14mm,PCB fence type terminal with protective shell
Function	PS-ON	PS-ON Terminal short circuit:power off output voltage
		PS ON Open circuit of terminal:open the output voltage
	Output voltage adj.	The output voltage can be adjusted, and the ADJV potentiometer can be manually adjusted, Range as per parameters listed in the above table.
	Output current adj.	The output current is adjustable, and the ADJV potentiometer is manually adjusted. When the load reaches the current setting value, the power supply will output constant current
	Auxliary voltage output	The machine provides an auxiliary voltage output of 12V-300mA
Protection	Over voltage	Cut off the output at 115% - 120% of the maximum output voltage, and it will not recover automatically. It will recover only after power off and restart
	Short circuit	Short-term momentary short circuit: Power supply shuts down and automatically recovers after 3 seconds.Long-duration continuous short circuit: Power supply shuts down and attempts to restart every 3 seconds (hiccup mode).
	Overload	1. Protection Mode: Constant Current Limiting, where the output current value is locked and remains unchanged, while the output voltage decreases as the load increases. 2. When a load of approximately 2.5 times the rated power is applied, it exceeds the power supply's overload constant current limiting range, effectively resembling a short circuit. In this case, the power supply will shut down and attempt to restart every 3 seconds  (operating in hiccup mode).
	Over temperature	PWM transistor's heat sink reaches 85°C ±5%, shut off output voltage; It will automatically recover when the temperature drops down to 75°C ±5%.
	Under-voltage	1. When the input voltage falls below AC 178V, the output will automatically be limited (the output power will be reduced to 2200W). 2. When the input voltage drops below AC 98V, the output will automatically be limited (the output power will be reduced to 2000W). 3. When the input voltage is below AC 88V, the power supply will not turn on.
	Fan failure	If either one of the two cooling fans fails to rotate or if no fan is detected, the power supply will not output any voltage and the device will not power on.
Function	Remote control	Power ON:open or 0-0.8VDC between RC+(pin 4)&RC-(pin 3) on CN100
		Power OFF:4-10VDC between RC+(pin 4)&RC-(pin 3) on CN100
	Remote sense	Compensate voltage drop on the load wiring up to 0.3V
	Fan Control	RTH2≥50ºC±10ºC Fan on;RTH≤40ºC±10ºC Fan off
Environment	Working temperature	-30ºC-45ºC Use at 100% full power, and load reduction is required for over temperature  (please refer to "Derating Curve")
	Working humidity	20 ~ 90% RH non-condensing
	Storage temp,humidity	-40~+85ºC,10%-95%RH,non-condensing
	Altitude	Only for use under 2500m altitude
	Withstand voltage	I/P-O/P:3.0KVAC     I/P-FG:1.5KVAC     O/P-FG:0.5KVAC
	Isolation resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC/70%RH
	EMC emission	EN55032 CISPR32 ClassA   EN61000-3-2.ClassA ; EN61000-3-3.  EN61000-4-2.3.4.5.6.11.
	Leakage current	<2.5mA/230VAC
Others	Cooling	Built in fan for heat dissipation (temperature controlled automatic speed regulating fan, 2 fans (ball type)), internal blowing mode
	Fan Noise	In an indoor environment of about 20-25 decibels, two fans rotate at full speed, and about 50 decibels are measured 50 cm away from the power supply
	Installation	(Horizontal installation) Length spacing: 236mm, width spacing: 205mm (refer to the dimension drawing) Use the matching mounting bracket (with M3 screws)
	Size	294*185*65mm (L*W*H)
	Packing	3.3kg
Note	1. All Parameters NOT specially mentioned are measured at 230VAC input,rated load and 25ºC of ambition temperature. 2. Ripple & noise are measured at 20MHZ of bandwidth by using a 12'' twised pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance:includes set up tolerance ,line regulation and load regulation 4.  Derating output is required under low input voltage. Please refer to the Derating Curve for details. 5.  The power supply shall be confirmed with the terminal equipment for electromagnetic compatibility. 6. The ambient temperature decreases at a rate of 5 degrees Celsius per 1000 meters elevation when the altitude exceeds 2000 meters.

MODEL		RSP-3000-12	RSP-3000-24	RSP-3000-48
OUTPUT	DC VOLTAGE	12V	24V	48V
OUTPUT	RATED CURRENT	200A	125A	62.5A
OUTPUT	CURRENT RANGE	0 ~ 200A	0 ~ 125A	0 ~ 62.5A
OUTPUT	RATED POWER	2400W	3000W	3000W
OUTPUT	RIPPLE & NOISE (max.) Note.2	150mVp-p	150mVp-p	200mVp-p
OUTPUT	VOLTAGE ADJ. RANGE	10.8 ~ 13.2V	22 ~ 28V	43 ~ 56V
OUTPUT	VOLTAGE TOLERANCE Note.3	±1.0%	±1.0%	±1.0%
OUTPUT	LINE REGULATION	±0.5%	±0.5%	±0.5%
OUTPUT	LOAD REGULATION	±0.5%	±0.5%	±0.5%
OUTPUT	SETUP, RISE TIME	1000ms, 80ms at full load
OUTPUT	HOLD UP TIME (Typ.)	10ms at full load
INPUT	VOLTAGE RANGE	110~ 264VAC    254 ~ 370VDC
INPUT	FREQUENCY RANGE	47 ~ 63Hz
INPUT	POWER FACTOR (Typ.)	0.95/230VAC at full load
INPUT	EFFICIENCY (Typ.)	87.5%	90%	91.5%
INPUT	AC CURRENT (Typ.)	20A/180VAC    16A/230VAC
INPUT	INRUSH CURRENT (Typ.)	60A/230VAC
INPUT	LEAKAGE CURRENT	<2.0mA / 240VAC
PROTECTION	OVERLOAD	100 ~ 112% rated output power
PROTECTION	OVERLOAD	User adjustable continuous constant current limiting or constant current limiting with delay shutdown after 5 seconds, re-power on to recover
PROTECTION	OVER VOLTAGE	13.8 ~ 16.8V	28.8 ~ 33.6V	57.6 ~ 67.2V
PROTECTION	OVER VOLTAGE	Protection type : Shut down o/p voltage, re-power on to recover
PROTECTION	OVER TEMPERATURE	Shut down o/p voltage, recovers automatically after temperature goes down
FUNCTION	AUXILIARY POWER(AUX)	12V 0.1A(Only for Remote ON/OFF control)
FUNCTION	REMOTE ON/OFF CONTROL	Please see the Function Manual
FUNCTION	ALARM SIGNAL OUTPUT	Please see the Function Manual
FUNCTION	OUTPUT VOLTAGE TRIM Note.5	2.4 ~ 13.2V	4.8 ~ 28V	9.6 ~ 56V
FUNCTION	CURRENT SHARING	Please see the Function Manual
ENVIRONMENT	WORKING TEMP.	-20 ~ +70ºC (Refer to "Derating Curve")
ENVIRONMENT	WORKING HUMIDITY	20 ~ 90% RH non-condensing
ENVIRONMENT	STORAGE TEMP., HUMIDITY	-40 ~ +85ºC, 10 ~ 95% RH
ENVIRONMENT	TEMP. COEFFICIENT	±0.05%/ºC (0 ~ 50ºC)
ENVIRONMENT	VIBRATION	10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
SAFETY & EMC (Note 4)	SAFETY STANDARDS	UL60950-1, TUV EN60950-1 approved
SAFETY & EMC (Note 4)	WITHSTAND VOLTAGE	I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC
SAFETY & EMC (Note 4)	ISOLATION RESISTANCE	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC/ 70% RH
SAFETY & EMC (Note 4)	EMC EMISSION	Compliance to EN55022 (CISPR22) Conduction Class B, Radiation Class A ; EN61000-3-2,-3
SAFETY & EMC (Note 4)	EMC IMMUNITY	Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A
OTHERS	MTBF	104.5K hrs min.  MIL-HDBK-217F (25ºC)
OTHERS	DIMENSION	278*177.8*63.5mm (L*W*H)
OTHERS	PACKING	4Kg; 4pcs/16Kg/1.89CUFT
NOTE	1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to "EMI testing of component power supplies." 5. Can't use the PWM signal to control the output voltage. 6. PV(PIN3) and PS(PIN4) of CN1 or CN2 must be shorted if "Output Voltage TRIM" function is not used. Otherwise, the power supply unit will have no output. PV(PIN3) and PS(PIN4) of CN1 or CN2 must be disconnected if "Output Voltage TRIM" function is used. Otherwise, the internal electrical components may be damaged, and the power supply unit may thus be out of order.