SMUN RSP-500-48 48VDC 10A 500W PFC Single Output Switching Power Supply

Product Description

Model		RSP-500-12	RSP-500-15	RSP-500-24	RSP-500-27	RSP-500-48
Output	DC voltage	12V	15V	24V	27V	48V
	Rated current	41.7A	33.4A	21A	18.6A	10.5A
	Current range	0-41.7A	0-33.4A	0-21A	0-18.6A	0-10.5A
	Rated power	500.4W	501W	504W	502.2W	504W
	Ripple&noise	150mVp-p	150mVp-p	150mVp-p	150mVp-p	150mVp-p
	Voltage adj.range	10-13.2V	13.5-18V	20-26.4V	26-30V	41-56V
	Voltage tolerance	±1.0%	±1.0%	±1.0%	±1.0%	±1.0%
	Line regulation	±0.3%	±0.3%	±0.2%	±0.2%	±0.2%
	Load regulation	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
	Set up,rise time	1500ms,80ms/230VAC      3000ms,80ms/115VAC(at full load)
	Hold up time(Typ.)	18ms/230VAC   14ms/115VAC(at full load)
Input	Voltage range	88-264VAC  124~370VDC
	Frequency	47 ~ 63Hz
	Power factor	PF>0.95/230VAC  PF>0.98/115VAC(at full load)
	Efficiency	88%	88%	89%	90%	91%
	AC current	6A/115V   3A/230V
	Inrush current	20A/115V    40A/230V
	Leakage current	<2.5mA/240VAC
Protection	Overload	105-130% rated output power
		Protection type:hiccup mode,auto-recovery after fault condition is removed
	Over voltage	13.8-16.2V	18.8-21.8V	27.6-32.4V	32.9-38.3V	58.4-68V
		Protection type:Shut down o/p voltage,re-power on to recover
	Over temperature	Shut down o/p voltage,receovers automatically after temperature goes down
Function	Remote control	Power ON:open or 0-0.8VDC between RC+(pin 4)&RC-(pin 3) on CN100
		Power OFF:4-10VDC between RC+(pin 4)&RC-(pin 3) on CN100
	Remote sense	Compensate voltage drop on the load wiring up to 0.3V
	Fan Control	RTH2≥50ºC±10ºC Fan on;RTH≤40ºC±10ºC Fan off
Environment	Working temperature	-30ºC~+70ºC(Refer to "Derating Curve")
	Working humidity	20-90%RH non-condensing
	Storage temp,humidity	-20~+85ºC,10%-95%RH
	Temp.coefficient	±0.03%ºC(0-50ºC)
	Vibration	10 ~ 500Hz, 2G 10min./1cycle, 60 min. each along X, Y, Z axes
Safety & EMC	Safety standards	Compliance to:CE and GB4943.1 EN 60950.1 safety standards
	Withstand voltage	I/P-O/P:2KVAC I/P-FG:2KVAC  O/P-PG:0.5KVAC
	Isolation resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25ºC/ 70% RH
	EMC emission	EN61000-3-2:2014/EN61000-3-3:2013
	EMC immunity	EN 55032:2015/EN55035:2017/60950-1
Others	MTBF	≥187.7K hrs MIL-HDBK-217F(25ºC)
	Size	L230*W127*H40.5mm
	Packing	1.3KG,9pcs/12.7kg/0.7CUFT
Note	1. All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25ºC of ambient temperature. 2. Ripple&noise are measured at 20MHz of bandwidth by using a 12 "twisted pair -wire terminated with a 0.1uf and 47uf parallel capacitors. 3. Tolerance:includes set up tolerance,line regulation and load regulation. 4. Derating output is required under low input voltage. Please refer to the derating curve for details. 5. The power supply should be considered as a part of the components in the system. All EMC tests will test the test samples on a metal iron plate with a thickness of 1mm, a length of 360mm * width of 360mm.