SMUN MDR-100-24 100W 24VDC 4.2A Din Rail Switching Power Supply

• Customization: Available
• Output Type: Single
• Warranty: 2 Years
• Model NO.: MDR-100-24
• Output Power: 51 - 100W
• Input Voltage: 110-220V
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Voltage Regulating Mode: Width Modulation Type
• Power Supplying System: Terminal Power Distribution Equipment
• Energy Transmission: One-way Transmission
• Modulation System: PWM
• Certification: CE, RoHS, ISO, CCC
• Brand: SMUN
• Application: Laboratory/CCTV Camera/3D Printer
• Protection: OLP OVP SCP OTP
• Size: 55*90*100mm(W*H*D)
• Weight: 0.42kg
• Output Voltage: 24VDC
• Output Current: 4.2A
• Rated Power: 100W
• Efficiency: 86%
• OEM: Yes
• Installation: Din Rail TS-35/7.5 or 15
• Test: 100% full load burn-in test
• Transport Package: Standard Packing
• Trademark: SMUN
• Origin: China
• HS Code: 8504401400
• Production Capacity: 5000PCS/Week

Product Description

SPECIFICATIONS
OUTPUT
Model	MDR-100-12	MDR-100-24	MDR-100-48
DC Voltage	12V	24V	48V
Rated Current	7.5A	4A	2A
Current Range	0-7.5A	0-4A	0-2A
Rated Power	90W	96W	96W
Ripple & Noise	120mVp-p	120mVp-p	150mVp-p
Voltage Adj. Range	12-15V	24-30V	48-56V
Voltage Tolerance	±1%	±1%	±1%
Line regulation	±1%	±1%	±1%
Load regulation	±1%	±1%	±1%
Setup, Rise Time	3000ms,50ms/230VAC   3000ms,50ms/115VAC at full load
Hold Up Time	50ms/230VAC   20ms/115VAC at full load
Voltage Range	85~264VAC   47~63 Hz; 120~370VDC
AC Current	1.3A/115VAC   0.8A/230VAC
Efficiency	83%	86%	87%
Inrush Current	Cold start 30A/115VAC   60A/230VAC
Leakage Current	<1mA/240VAC
Over Load	105%~150% rated output power
	Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage	15.6-18V	31.2-36V	57.6-64.8V
	Protection type: Shut down o/p voltage, re-power on to recover
Over Temp.	Protection type: Shut down o/p voltage, recovers automatically or re-power on recover
DC OK signal	Relay contact rating(max):30V/1A resistive
Working Temp., Humidity	-10ºC~+60ºC; 20%~90% RH non-condensing
Storage Temp., Humidity	-40ºC~+85ºC; 10%~95%RH
Temp. Coefficient	±0.03%/ºC(0~50ºC)
Vibration	10~500Hz, 2G 10min./1cycle, 60min, each along X, Y, Z axes
Withstand Voltage	I/P-O/P: 3KVAC   I/P-FG:2KVAC   O/P-FG:0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-F/G: >100M Ohms / 500VDC/25ºC/70% RH
Safety Standard	Design refer to UL508, TUV EN60950-1
EMC Standard	EN61240-3,EN55011,EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11,EN55024,EN61000-6-2, EN61204-3,heavy industry level, criteria A
Dimension	55*90*100mm(W*H*D)
Weight	0.42Kg
Packing	30pcs/13.6Kg/0.82CUFT
NOTE
1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25ºC of ambient temperature. 2.Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1μf & 47μf parallel capacitor. 3.Tolerance: includes set up tolerance, line regulation and load regulation. 4.The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives.